General Device Description; Delivery Content - OSRAM e:cue SYMPL input Node Installationsanleitung

General device description

2 General device description
e:cue SYMPL Nodes are a system of interfaces for e:cue SYMPHOLIGHT
only. They provide various connection types like DMX512, DALI, digital
inputs and outputs etc. SYMPL Nodes always operate in online mode, as a
device interface for SYMPHOLIGHT. All interactions are initiated and
controlled by SYMPHOLIGHT. Connections between servers, Cores and
Nodes are always made with e:net via Ethernet.
The e:cue SYMPL input Node is an eight-channel analog input interface for
use with e:cue's lighting control solution SYMPHOLIGHT. It provides eight
independent analog 10 V inputs, four inputs also support 20 mA constant
current input, configurable with four slide switches. The e:cue
SYMPL input Node can be powered by an external power supply or via
Power-over-Ethernet. It is easily mounted on standard 35 mm DIN rails, or
with a key hole in the housing base on walls or on any stable vertical
surface. The e:cue SYMPL input Node is a simple, reliable and easy to use
interface solution for e:cue lighting control solutions with SYMPHOLIGHT.
To operate SYMPL Nodes a SYMPHOLIGHT version 2.0 or
i
higher is mandatory. Earlier versions do not support the
SYMPL Nodes. SYMPL Nodes are not supported by the
e:cue Lighting Application Suite.
e:cue SYMPL input Node is not hot-pluggable.
i
2.1

Delivery content

Delivery content for the e:cue SYMPL input Node (AB444200035):
1. e:cue SYMPL input Node
2. Safety instructions
3. Installation guide (English only)
08