Support; Installation; Installation Conditions - OSRAM e:cue SYMPL input Node Installationsanleitung

3.6

Support

In case of technical problems or questions regarding installation and repair
please contact:
OSRAM GmbH
Customer Service
Karl-Schurz-Str. 38
33100 Paderborn, Germany
+49 (5251) 54648-0
support@ecue.com
4

Installation

The installation of the SYMPL input Node consists of mounting the device,
connections to analog inputs, to e:net, and to power supply.
The sequence of cabling is not defined. Supply the SYMPL input Node with
power after all cabling is completed; it starts booting.
Connect cables and data only when the device is powered
!
down.
Each cable should not exceed a length of 30 m.
!
4.1

Installation conditions

Installation position:
Horizontal spacing:
Minimum vertical rail grid spacing:
Recommended vertical rail grid spacing:
Installation location
Terminals on top and bottom
No spacing necessary
115 mm (90 + 25 mm)
(excluding conduit)
160 mm (with 40 mm conduit)
Indoor
Installation
13