Mounting And Removing Flat Panel Screen - peerless-AV LWS410/BK Handbuch

Mounting and Removing Flat Panel Screen

WARNING
• Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screens.
Guide hooks of adapter brackets (B) onto
3
flange of wall plate (A). Then slowly swing
screen toward wall as shown in fig. 3.1.
Gently press on screen to ensure velcro
strips are engaged as shown in detail 1.
To horizontally adjust screen, swing
screen away from mount to disengage
velcro, and slide screen along wall plate
to desired position as shown in fig 3.2.
Then slowly swing screen toward wall to
re-engage velcro.
To remove screen from mount, swing
screen away from mount, and lift screen
fig. 3.2
off of mount.
A
SCReeN
A
WaLL WaLL
WaLL
B
vELcrO
B
DeTAIL 1
fig. 3.1
8 of 34
ISSUED: 05-29-08 SHEET #: 202-9283-5 03-30-09