Vermeiren Alya Gebrauchsanweisung Seite 17

The charging process can be stopped or started any time by following the instructions above.
3.5.2 Removing and replacing the battery
To remove the battery from the scooter:
1. Turn both locks (10) to align the blue markings. The
battery cover (11) is now unlocked.
2. Carefully lift the battery cover to avoid damaging any
wiring.
3. Disconnect the battery from all wires.
4. Take out the battery by pulling it off the Velcro straps.
To replace the battery:
1. Connect the battery to all wires.
2. Place the battery on the Velcro straps to secure it into
place.
3. Close the battery cover (11). Make sure that no wires
are pinched between the cover and frame.
4. Turn both locks (10) to align the red markings. The battery cover is now locked.
5. Switch on the scooter to check if everything is working properly.
13
EN
Alya
2020-03
NL
Using your scooter
11
10