Werbung
Verfügbare Sprachen
Verfügbare Sprachen
3.3
Connecting the selected device
Refer to the instructions of the connected devices for further assembly information and
any limitations.
4.
Storage and transportation, cleaning and disinfection,
maintenance
4.1
Storage and transportation
The materials used for the BRK 820 masks have optimum anti-aging characteristics
and therefore no special precautions are needed for storing the masks. However, it
is recommended to keep new facemasks in their original packaging in well ventilated
ware houses away from possible sources of heat. The masks should be stored in tem-
peratures ranging from -20 to 50°C. For the preservation of ready-made masks, it is
recommended to keep these in closed cupboards, stored away from dust, light, chemi-
cal vapours, and any sources of heat. For transportation, use their original packaging.
4.2
Cleaning/Disinfection
After use, the masks should be cleaned with a soft cloth to remove sweat and con-
densation. In cases where the masks are particularly dirty, they can be cleaned with a
simple dishwasher at a maximum temperature of 40 °C using a neutral detergent. Do
not use solvents to wash the masks. Should you wish to disinfect the masks, use an
aqueous solution with a Chlorhexidine based (0.5%) or electrolytic Chloroxygen based
(0.1%) disinfectant. Rinse all the pieces under running water again after disinfection.
For a more thorough cleaning or disinfection, requiring the complete disassembly of the
mask, please refer to BartelsRieger or one of its authorised workshops.
12
Werbung
