Storage; Design And Installation Of Your Air Curtain System - Teddington Friguvent Originalbetriebsanleitung

F R I G U V E N T

14.4 Storage

If you want to put the machine in storage, you need a dry, covered area with:
Temperature
Air humidity
▪
▪

15 Design and installation of your air curtain system

We recommend installation of a repair switch and door contact!
Never walk underneath suspended parts and/or underneath the device dur-
ing installation!
For a safe installation, always use secure climbing aids to avoid the risk of fall-
ing.
It is essential to use all specified anchor points on the air curtain system! Spe-
cial mounting materials can be obtained from Teddington. The mounting ma-
terials must be adapted to the local situation and the structural stability
checked where necessary. The supplied mounting parts must be checked for
suitability and replaced if necessary. The specialist installation company has
sole responsibility for the safe installation.
Systems with integrated heating systems must be installed with a safety dis-
tance of at least 150 mm from the ceiling.
All water and electrical installations must be performed by specialist compa-
nies (such as HVAC companies, electricians). Teddington Luftschleieranlagen
GmbH can otherwise not assume any warranty (see chapter "Safety").
29
-15 degrees C up to +50 degrees C
20 up to 70%
Incorrect storage can result in damage to the system. Teddington accepts
no liability for damage resulting from incorrect storage.
A detailed safety check is required when putting the system backing into
operation after storage.
www.teddington.de