System Settings; Backlight Time-Out - Philips sru 8008 Bedienungsanleitung

SRU8008_IFU_bundel 1 v09.qxd
Select the device from which you want to delete a function.
2
Select the function you want to delete.
3
Confirm you want to delete the function.
4
The function is deleted.
4.4

System Settings

4.4.1

Backlight Time-Out

When you use the SRU8008, the backlight turns on. After 5 seconds it
turns off again.
To change this time out:
Go to Setup - System Settings, select Backlight Time-Out and
1
press .
Select the preferred backlight time-out with the rotary wheel:
2
3 seconds, 5 seconds, 10 seconds, 20 seconds.
Confirm the new time-out setting.
3
The backlight time-out is changed.
D Note
The backlight time-out has an impact on the lifetime of the batteries,
the longer the backlight stays on, the faster the batteries drain.
4.4.2 Key Backlight
To turn on and off the key backlight:
Go to Setup - System Settings, select Key Backlight and
1
press .
Select On or Off with the rotary wheel.
2
Confirm the new key backlight setting.
3
The key backlight is turned on or off.
4.4.3 Full Reset
When resetting the SRU8008 completely, all installed devices, activities
and other settings are deleted. After the reset, the SRU8008 needs to be
installed again.
To reset the SRU8008:
Go to Setup - System Settings, select Full Reset and
1
press .
Select Yes with the rotary wheel and press
2
Press
3
The SRU8008 deletes all settings and restarts with the Installation
Wizard. This can take up to one minute.
Getting the Most out of Your SRU8008
03-12-2007
to reconfirm.
11:35 Pagina 15
.
15