Specific Safety And Warnings - Felisatti DC10,8L2 Original Bedienungsanleitung

accessories, or storing power tools.
Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tools operation. If
damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and tool
bits etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed.
Use of the power tool for operations different
from those intended could result in a hazardous
situation.
5) Battery tool use and care
a) Recharge only with the charger specified
by the manufacturer.
A charger that is suitable for one type of battery
pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically
designated battery pack.
Use of any other battery packs may create a risk
of injury and fire.
c) When battery pack is not in use, keep
it away from other metal objects, like paper
clips, coins, keys, nails, screws, or other small
metal objects that can make a connection
from one terminal to another.
Shortening the battery terminals together may
cause burns or a fire.
d) Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water.
If liquid contacts eyes, additionally seek medical
help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool
is maintained.
4
tools. Check for
Specific Safety
and Warnings
• Do not use the charger under the
rain or when it is wet.
Failure to observe this can cause
serious injury or death due to electric
shock.
• Do not insert metal wire or any conductive
object through the ventilating opening of the
charger.
Failure to observe this can cause serious injury or
death due to electric shock.
• Do not attempt to disassemble the charger
and keep the charger out of the reach of
children.
• If the cord of the charger has been
damaged, replace or repair it immediately.
Using the charger with damaged cord may cause
electric shock.
Electric shock may cause injury.
• If the cord of the charger has been damaged,
replace or repair it immediately.
Using the charger with damaged cord may cause
electric shock.
Electric shock may cause injury.
• Do not throw the battery into the live fire.
In the fire, the battery may explode due to high
temperature and cause serious injury.
• Do not short the terminals of the battery. If
the terminals of the battery is short circulated,
excessive current will flow and fire or
explosion may occur causing serious injury.
• Avoid strong impact on the battery and do
not pierce the battery case with a sharp object.
Fire or explosion may occur causing serious
injury.
• Store the battery indoors at 0~40ºC and avoid
direct light and closed hot and humid places.
Fire or explosion may occur causing serious
injury.
• Do not make your fingers and hands touch
with the drill bit during operation.
When your fingers and hands are touched with
the drill bit or caught in it, you may be injured
seriously.
• Do not leave the running tool.
Other operators stayed close to you may be
injured.
• Set the forward/reverse lever in the neutral
position while you are changing or operating
the tool.
Careless operating of the switch may cause a
serious injury by the rotating part of the tool.
• Make sure the battery is attached in the body
of the tool tightly before you start operation.
When the battery is not attached tightly, it may be
fallen during the operation and cause an injury in
the top of your foot.
2