Welch Allyn ProXenon Bedienungsanleitung Seite 18

14 Chapter 2
10. Turn the ProXenon 350 Surgical Illuminator on and adjust light
intensity to the minimum level necessary for adequate
visualization.
Note Refer to the Welch Allyn ProXenon 350 Surgical
Illuminator Directions for Use, Ref 90200MAN, for
instructions on operating light source.
11. Turn the Video Processor on.
The Power Indicator LED illuminates once power is turned
on.
12. Confirm that your monitor correctly displays the video image.
If there is no video signal, refer to
on page 19.
To shut down:
1. Turn Video Processor power off.
2. Unplug the Camera Head from the Video Processor.
Welch Allyn ProXenon Headlight Camera System
"Basic Troubleshooting"