Bahco BCL33AP1 Betriebsanleitung Seite 10

Attaching Polisher Backing Pad
1. U se polisher wheel flange wrench to hold
the hexagonal nut.
2. Align the polisher backing pad bolt
thread with the thread hole on
the eccentric wheel ass'y.
3. U se flange wrench to hold the hexagonal nut and stabilize the eccentric wheel ass'y counter
weight disc, spin the polisher backing pad in clockwise direction until tightened. If baking
pad came loosely, please use this same method to tighten the backing pad.
4. U se flange wrench to hold the hexagonal nut and stabilize the eccentric wheel ass'y and
spin the polisher backing pad in counterclockwise direction to remove.
Operation Procedure
1. Prepare glaze wax polish.
2. A pply the wax on the vehicle, then use polisher to spread wax evenly.
3. W ait for 10~15 minutes when wax becomes congealed.
4. Cover the lapin cloth on the sponge bonnet.
5. Use polisher to polish thoroughly.
Use flange wrench to
stabilize the eccentric
wheel ass'y
Use flange wrench to
stabilize the eccentric
wheel ass'y
• 10 •
Threads of
eccentric wheel ass'y
Clockwise
Counterclockwise