Bellman & Symfon BE1411 Bedienungsanleitung Seite 86

All manuals and user guides at all-guides.com
Using electromagnetic detection
The door transmitter can be set to detect electromagnetic fields emitted
by electromechanical doorbells. You only need to use this function if the
programming of the door transmitter has failed. Here is how it's done:
ƒ Activating electromagnetic detection
Move the 4th signal-switch
Up=On position.
ƒ Deactivating electromagnetic
detection
Move the 4th signal-switch to the
Down=Off position.
Clear the recorded sounds
To clear all recorded sounds, press and hold button 1 and 2 simultaneously for 5s.
Please note: This will clear the sounds that has been recorded during programming.
All radio key settings and transmitted signal settings will be kept intact.
85
BE1411_055MAN009.indb 11
1
to the
1
2015/2/11 9:51:46