Wahoo KICKRclimb Anleitung Seite 6

Step 4:
Attaching a bicycle with a
Quick Release Skewer:
• Use the included quick
release skewer.
• Insert the quick release skewer
(1) into the KICKR CLIMB.
• Lower your fork (2) and fully
seat the fork's dropouts onto
the axle adapters.
• Tighten the quick release acorn
nut and clamp the lever closed,
securing your bicycle.
Attaching a bicycle with a Thru Axle:
• Use the thru axle included with
your bicycle.
• Lower your front fork (3) to align
the dropouts with the holes in the
center of the thru axle adapters.
• Finish mounting your bicycle
by reinserting the thru axle (4)
through the fork and adapters,
tightening securely.
P
PROTIP:
The quick release lever is
"open" when it curves away
from the bicycle frame the
lever is "closed" when it
curves towards the bicycle
frame. Closing the lever
should require enough
force to leave an imprint
on your hand.
(2)
(1)
(3)
(4)
4