Configuration Guide - aqprox! appUSB300HP Gebrauchsanweisung

When the Completing the Found New Hardware Wizard screen
displays, it indicates that the installation has been successfully
completed and your Wireless USB Adapter is ready for configuration.

5. CONFIGURATION GUIDE

5. CONFIGURATION GUIDE
5. CONFIGURATION GUIDE 5. CONFIGURATION GUIDE
Once the installation is complete, you can configure the Wireless
USB Adapter to connect to a wireless access point (AP). The wireless
configuration utility will start automatically, and youÊll also find a tray
icon at the lower right in your Windows systemÊs tray.
1. Right-click the RaUI icon and select „Launch Config Utility‰.
2. The configuration utility will scan for wireless networks within
range. Click „Rescan‰ to refresh the list of available wireless
networks. To join a particular network that displays, select it
and click „Connect‰.
3. If the wireless network uses encryption, you need to input the
correct encryption key. The configuration utility automatically
suggests the correct authentication type (see the drop-down
list), and you should not change the suggested value.
17