Specifications; Troubleshooting - Lightmaxx Vector Low Fog Bedienungsanleitung

Specifications:

Model
Power supply
Power consumption
Fuse
Optimally useable floor area
Warm-Up time
Fog fluid consumption
Water consumption
Tank capacity Fluid
Tank capacity Water
Power supply
DMX - Connection
DMX - channels
Dimensions (L x W x H)
Weight

Troubleshooting:

The following overview serves as an aid for quick troubleshooting. If you are unsure, contact the
manufacturer, the dealer or the corresponding specialist personnel. Never open the device on
your own!
Symptom
No function
No fog output
No reaction in DMX mode
No reaction in remote mode
If the specified corrections have not led to success, please contact our service staff. The contact
details can be found at www.musicstore.de
lightmaXX Vector Low Fog
AC220-240V 50/60Hz
1800 Watt
250V/10A
150m²
3,5 Minutes
8-36ml/Minute
125ml/Minute
2,5 L
12 L
PowerCon compatible
3-pol
2
760 x 440 x 600mm
40 Kg
Troubleshooting
Check the mains connection and the fuse
Check the fill level of the fluid container
Check the cable connections
Check your DMX address setting
If available, try an alternative DMX controller
Change the battery in your remote control
Ensure that the IR transmitter and receiver are at
close and clear distances from each other
ENGLISH