Led Indicators - Asus WL-330g Bedienungsanleitung

Wall
socket
After installation, check the Power and Ethernet LEDs. These LEDs light
up to indicate that the device is on and has physical connection to an
Ethernet network. Refer to the LED indications below.

LED indicators

The ASUS WL-330g comes with a Power, Wireless,
and Ethernet LED indicators. Refer to the table below
for LED indications.
LED Status Mode* Indication
Ethernet On
Off
Wireless On
On
Off
Off
Blinking
Power On
Off
Blinking
*Modes: AP – Access Point mode
ASUS Pocket Wireless Access Point (WL-330g)
6
Switch
USB
5 4
AP/EA The device is connected to an Ethernet network.
AP/EA The device is off or not connected to an Ethernet
network.
AP The device is on and ready.
EA The device is associated with an AP or other
wireless device.
AP The device is off.
EA The device is not associated with an AP or other
wireless device.
AP/EA The device is transmitting or receiving data.
AP/EA The device in on and ready.
AP/EA The device is off or performing boot sequence.
AP/EA Firmware upgrade failed.
EA – Ethernet adapter mode
WL-330g
2 1 3
5