Pioneer PDK-TS03 Bedienungsanleitung Seite 11

Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have fin-
ished reading the instructions, put them away in a safe place
for future reference.
CAUTION
This symbol refers to a hazard or unsafe practice which
can result in personal injury or property damage.
Installation
¶ Consult your dealer if you encounter any difficulties with
this installation.
¶ Pioneer is not liable for any damage resulting from im-
proper installation, improper use, modification, or natural
disasters.
Cautions
1. This table top stand was exclusively designed for plasma
displays produced by PIONEER.
2. Do not use this stand for a plasma display or any other
purpose that is not specified. The stand should not be
modified and should only be used for plasma displays.
3. Improper installation may result in the stand falling over
and cause serious injury. Be sure to have the plasma dis-
play lying flat when attaching the stand to the main dis-
play.
4. Installation Location
(a) Make sure to install the stand in a location that can
sufficiently support the combined weight of the stand
and the display.
(b) The installation location should be a completely flat
and stable surface. Take proper precautions when
installing the stand to make sure that the weight of
the display is equally distributed throughout the stand.
(c) Do not install this stand outdoors, at a hot spring, or
near a beach.
(d) Do not install this stand where it may be subjected
to vibration or shock.
5. (a) Assemble the stand in accordance with all of the in-
structions and securely stabilize the stand with
screws at all locations that are indicated.
There have been cases where after installing the dis-
play, damage has occurred from the stand falling over
or similar situations.
(b) To assure that the display is installed safely, installa-
tion should be performed with more than two people.
(c) Before installation, turn off the power for the display
and peripheral devices, then remove the power cord
plug from the power outlet.
6. This product rotates 10° to the left and right.
Do not place objects within the range of rotation of this
product and the plasma display. Install this product so that
during routine use or when rotated, it does not protrude
from where the rack or the like has been installed. Failure
to do so could cause unforeseen accidents, such as the
equipment breaking or falling over. (See p. 15)
In addition, be careful not to insert your hand at the base
of the resin cover, as doing so could cause injury.
7. Prevent accidents by taking thorough measures to ensure
that the equipment does not fall over. (See p. 16)
7 Check That You Have All the Parts
• Table top stand ............... 1
• Installation bolts 1
...................... 2
(M8 x 20)
• Hexagonal wrench ..... 1
• Installation bolts 2
........................ 2
(M8 x 40)
テーブルトップスタンド
Table top stand
Support de couverture de table
Tischgestell
Supporto di tavolo
Tafel staander
Table top stand
Soporte de mesa
臺式支架
PDK-TS03
取扱説明書
Operating instructions
Mode d'emploi
Bedienungsanleitung
Istruzioni per l'uso
Gebruiksaanwijzing
Bruksanvisning
Manual de instrucciones
操作說明書
• Operating instructions
(This document) ......... 1
11