Usage; Cleaning And Maintenance - Beurer HL 35 Gebrauchsanweisung

Note
• In order to achieve a long battery service life, fully charge the battery at least once per
year.
• The lady shaver can be used in the shower or bath and it can be cleaned under run-
ning water.
• When used on dry skin, the skin must be completely dry and free from grease.
• When used on wet skin, it is important that the skin is sufficiently damp so that the
device can glide optimally over the skin. Shower gel or soap facilitates the shaving
process.
• Do not use creams/lotions containing alcohol before or after using the shaver.
• In order to avoid irritation, do not press the shaver head too firmly onto the skin.
Thoroughly clean the shaver head before shaving. This reduces the risk of infection as far as is
possible.

7. Usage

• Press the on/off button to switch on the device.
• The LED light ensures optimal lighting conditions so that you can see and remove the finest
hairs.
• Hold the skin taught with your free hand, to raise the hair.
• Use the device slowly, steadily and without pressure with the illuminated side against the di-
rection of hair growth. As hair doesn't always grow in one direction, it can be useful to move
the device in various directions over the skin to achieve an optimal result.
Using the exfoliation attachment
The exfoliation attachment gently removes dry, dead skin cells and prevents ingrowing hairs.
Remove the shaver attachment by gently pulling it out.
Insert the exfoliation attachment.
Switch on the device and move it slowly and gently over the skin.
Using the spacer combs
Using the spacer combs, you can cut your hair to two different lengths:
Small spacer comb: 4 mm,
Large spacer comb: 8 mm.
Position the comb you wish to use on the shaver head such that the teeth of the comb face
outward on the illuminated side.
Switch the device on and always move the device against the direction of hair growth.
Ensure that the comb surface always remains in contact with the skin.

8. Cleaning and maintenance

WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter
into the device or accessories.
• Additionally, the shaver blades can be removed from the shaver head and cleaned under
running water. Before cleaning the shaver head in this manner, hair can be removed from the
device using the cleaning brush.
16