Handicare Combi Handbuch Seite 3

Bedpan / Bucket frame – see figure 2:
The bedpan / bucket frame can be used in
combination with a keyhole or round shaped
bucket.
To assemble: The two end pieces (B, on the
drawing) rest on the rear of the seat frame.
For keyhole shape bucket, insert the two
front rods (A) into the inner holes (C).
For all other bucket shapes use the outer
holes (D). If no bucket or bed pan is being
used, the frame may be detached so the
chair fits easily over a toilet.
figure 2
Height Adjustment – see figure 3:
By re-positioning the snaplocks on the chair legs, the Combi may be adjusted to 6 different
heights.
To adjust the height of the chair:
1. Remove snaplock
2. Select one of the 6 positions
3. Reinsert snaplock.
Repeat for all 4 legs.
IMPORTANT: Check that all four legs are the same height and that all of the snaplocks are
inserted correctly into the frame before use.
snaplock
1
3
2
figure 3