Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Item
System functions
Options
Selects the
1
LANGUAGE
display interface
language.
ENABLED
2
DO NOT DISTURB
DISABLED
ENABLED
CAN BE
3
MONITORED
DISABLED
ENABLED
4
OPENING
DISABLED
5
PORT STATE
DOOR 1 / DOOR 2 / CCTV1 / CCTV2
6
DEVICE ADDRESS
Room 1/2/3/4
RESTORE
7
ENTER
DEFAULT
8
FORMAT FLASH
ENTER
9
FORMAT SD CARD
ENTER
COPY FILE TO SD
10
ENTER
CARD
AUTO CAPTURE
11
00, 01
QUANTITY
AUTO LEAVING
ENABLED
12
MESSAGE
DISABLED
13
SCREENSAVER TIME
14
FIRMWARE VERSION
Switch the option setting with ◄ / ►.
Notes
Choose the language: PL, EN, DE, FR, RU
The LED will flash if this mode is enabled.
The mode is disabled by default during a call from
an entrance panel, display-to-display intercom
(internal) calls and the public address mode.
This display can be monitored (listened to) by
other displays in the video entry phone system
if this option is set to ENABLE.
The mode is disabled by default.
Touch
to unlock the electric strike linked to
the entrance panel. Touch
to open the gate
linked to the entrance panel.
When this function is disabled, touching
followed by
/
will open the door or the
gate linked to the entrance panel.
Choose ROOM 1 on the display that should be
the main (master) display of the system. The
setting will be yellow if the same device address
is set in two displays in the video entry phone
system.
Restores the default factory settings of this
display.
Formats the embedded flash memory of this
display.
Formats the microSD card installed in the
display.
Copies all files from the embedded flash memory
to the microSD card in the display.
00: FUNCTION DISABLED
Image capture;
01: Automatic capture of 1 picture during a call.
The visitor calling with an entrance panel can
leave a voice message after an Out-of-Home
Reply and tone.
Disables this mode.
30 s, 1, 2, 3, 5, 10, 20, 30, 40, 50, 60 min
Displays the version of the firmware installed on
the display.
13
Werbung
Inhaltsverzeichnis
