Intended Use; Safety Instructions - Playtive Junior TIPI Aufbauanleitung

Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety informa-
tion carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x tent (1)
4 x wooden pole, top (2)
4 x wooden pole, bottom (3)
4 x connecting piece (4)
1 x assembly instructions
Technical data
Dimensions (assembled):
approx. 110 x 162 x 110cm (w x h x d)
Date of manufacture (month/year):
11/2019

Intended use

This product is a toy for children aged 18 months
and older and has been designed for indoor
use. Only for private use.

Safety instructions

• Warning. Not suitable for children under 18
months of age. Risk of strangulation. Long
cord.
• Warning. All packaging/fastening materials
and the "SUPER DRY" bag are not considered
part of the toy and must be removed for safety
reasons before the product is given to children
to play with.
• Warning. For private household use only!
Keep the product away from open flames or
other heat sources!
• Check the product for damage and wear be-
fore each use. The product may only be used
when in good working order and condition.
• Assembly must be performed by an adult.
Make sure that the product and all parts and
components only given to the child only after
assembly.
• Children may only play with the product
under adult supervision.
• Warning. To be used only on an even surface.
Erect the product at a minimum distance of 2m
from any objects such as furniture, walls, etc.
Avoiding material damage!
• Avoid contact with sharp, hot, pointed, or
dangerous objects.
Assembly
Assemble the product as follows:
1. Connect the upper wooden pole (2) and the
lower wooden pole (3) using the connecting
piece (4) to form a long wooden pole (fig. B).
2. Insert the four assembled wooden poles one
after the other into the side sleeves of the tent
fabric (1a) (fig. C).
Note: The upper wooden pole (2) must be on
the top side of the tepee.
3. Guide each of the cords attached to the tent
fabric through the holes of the two upper
wooden poles (2) (fig. D).
4. Tie the cord tightly to secure the wooden
poles.
Note: Secure the cord with a tight knot.
5. Fully spread out the four lower corners of the
tepee.
6. Close the door of the tepee by attaching the
hook-and-loop fasteners to the door (fig. E).
7. To keep the door open, roll up each door and
tie them tight using the fasteners on the side of
the tent fabric (fig. F).
Disassembly
Disassemble the product as follows:
1. Loosen the cords and pull the wooden poles
out of the side sleeves of the tent fabric.
2. Fold the tent fabric up.
GB 13