Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following instructions
for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe.
When passing the product on to a third party,
always make sure that the documentation is
included.
Scope of delivery (figure A)
1 x Play tent(1)
1 x Bag (2)
4 x Four-part tent pole with elastic band (3)
1 x Bag for tent poles (4)
1 x Instructions for use
Technical data
Maximum load-carrying capacity: 50kg
Dimensions (assembled): approx. 100 x 135cm
(Ø x H)
Correct use
This article was developed as a toy tent for child-
ren aged between 3 and 6 for indoor use or for
outdoor use in dry weather. For private use only.
Safety notes
Risk of injury
• Warning! Not suitable for children under the
age of 36 months. Risk of strangulation with
the long strings.
• Warning! Packaging materials must be re-
moved for safety reasons before the article is
given to children.
• Warning! Only for indoor use.
• Warning! Keep away from fire.
• The article must be assembled by adults.
• Children may only play with the article under
adult supervision.
6
GB/IE
• Check the article for damage or wear before
each use. The article may only be used while
in perfect condition.
• Make sure to leave sufficient distance to
objects and to other people so that nobody
gets injured.
Caution: Use the article on a surface
that is free of hazardous and pointed
objects.
Avoiding damage to the material!
• The article may not be exposed to the sun for
long periods. Otherwise this can cause dama-
ge to the article.
• Avoid contact with sharp, hot, pointed, or
hazardous objects.
Assembly
Warning! Assembly must be carried out
by an adult. The article is spring-loaded.
1. Remove all packaging materials and remove
the article carefully from the bag. Make sure
you have sufficient space.
2. Lay the article down with the underside on the
floor.
The tent poles comprise four connected parts
each.
IMPORTANT: The coloured end of the pole is
fitted into the fixture on the tent floor.
3. Piece together the four parts of the first tent
pole (figure B).
4. Insert one end of the tent pole into the cor-
responding fixture on the tent roof (1a) and
the other end into the fixture on the tent floor
(1b) (figure C).
5. Attach the tent pole to the tent wall (1c)
(figure C) with the help of the hook-and-loop
strips.
6. Repeat steps 3 to 5 until you have installed all
the tent poles.
Dismantling
1. Remove all four tent poles from the article.
2. Fold the article together as shown in figure D
and store it in the bag.
Werbung
Inhaltsverzeichnis
