Hamamatsu Photonics Photo Dynamic Eye PDE C9830 Bedienungsanleitung Seite 8

Safety Precautions
The PDE device is not intended for patient diagnosis.
Do not use the PDE to diagnose patients or make clinical decisions using only the images ob-
served with the PDE.
Do not bring this device into contact with the patient's body.
This device is not sterile.
Put the Camera Unit into the sterile drape (option) when it is used in a sterile area. Parts of the
PDE other than the Camera Unit must be placed outside of the sterile area.
Power supply
Use the device with the voltage indicated on the rating label. Using a different voltage can dam-
age the system and lead to fire or electric shock.
Cables
Be careful not to place heavy objects on the cables or to bend them excessively. Doing so can
damage the cables and lead to fire or electric shock.
Power supply cord
Use the accessory power supply cord when the device is used.
Do not touch the plug with wet hands. Doing so can lead to electric shock.
Power supply cord
When unplugging the power supply cord, always pull the plug and not the cord. Pulling the cord
can lead to fire or electric shock.
Remove the power supply cord from the outlet when the device is not in use for long periods of
time. Leaving the power supply cord in the outlet for long periods of time when the device is not in
use can damage the cable and lead to fire or electric shock.
Connecting and disconnecting cables
Always turn off the power before connecting and disconnecting the cables.
Page 1-6
WARNING
WARNING
CAUTION
Instruction Manual PDE
Version 1.30E