Orca 300 CL Betriebs- Und Wartungsanleitungen Seite 17

c. To avoid damaging the pool wall or the cleaner, make sure that the cleaner does not touch it
while you remove it from the pool.
d. Before removing the cleaner from the pool, it is best to hang it 10 - 15 seconds above the pool
to drain it of water.
e. Turn off the cleaner after each use.
First-hand experience
2.2
a. Instructions for button and indicator
Switch
Push the switch to right, blue indicator is on, cleaner is started. Push the switch to left,
red indicator is off, cleaner is turned off.
Charge the cleaner when it is turned off.
Instructions
No.
Switch
1
2 Indicator
Charging Port
Function
To turn on or turn off the cleaner.
Blue light is steady on: switch on
Blue light flashes: the cleaner is working
Yellow light flashes: low battery and self-beaching
Yellow light is steady on: finish self-beaching
Red light is steady on: switch off
Red light flashes: faults
16
Indicat
or