Names And Functions Of Parts - Sony IPELA PCS-L33 Kurzanleitung

Names and Functions of
Parts
Front view
5
6
7
8
a Tally lamp
Lights up when local video is being sent to the remote system.
b Camera lens
c Lever for lens cover
Lets you close the camera lens.
d Microphone
e
(Volume) buttons
Serve to adjust the volume.
+: Increases the volume level.
–: Decreases the volume level.
f
(Phones) jack (stereo mini jack)
Allows connection of a pair of headphones (commercially
available).
g
(Mic) jack (mini jack)
Allows connection of the optional microphone PCS-A1 or
PCSA-A3.
h Speakers
i Online lamp
Shows mainly the incoming/outgoing call status.
j
(Mic Off) button and indicator
Lets you suppress the sound from the local system. Press the
button again to resume sending the sound to the remote system.
24

Names and Functions of Parts

1 2 3 4
k
(Videoconference) button and indicator
Serves for switching from computer screen to
videoconference screen.
l
(PC) button and indicator
Serves for switching to computer screen.
m
(Menu) button
Press to bring up the Setup menu.
Press and hold this button for 3 seconds during
communication to bring up the DTMF soft keyboard on
the screen.
n
(Power) switch and indicator
9
Turns power to the system on and off.
When using the system as a computer screen in PC mode,
q;
pressing the switch once turns the power off.
qa
When using the system in videoconference mode, pressing
qs
the switch once sets the system to standby mode. To turn
the power off in videoconference mode, press the switch
qd
again within 5 seconds of the first press.
qf
qg
Note
The power switch does not function during a
communication session.
o
"Memory Stick" indicator
Shows the status of the "Memory Stick" slot.
Note
Do not remove the "Memory Stick" when this indicator is lit.
Rear view
a Rear cover
Removing this cover gives access to the connector panel.
The connecting section between the stand and the display
is also located behind the panel. You can adjust the height
of the display by changing the screw positions.
1