Inateck BS02001 Bedienungsanleitung Seite 8

4) Scan 'Confirm front data change' to complete setting.
Confirm front data change
B. Keep end data of barcode
For example：If you want to output the last 5 digits of barcode to your computer
and remove the rest part, please set your scanner as steps below.
Begin Setting
1) Scan setting barcode of 'Keep End Digits'
Keep End Digits
2）The corresponding characters for 5 in Appendix 1 is '05', so you need to scan
the barcode '0' and '5' according to Appendix 2 in turn.
3）Scan 'Save Settings' to save your setting.
Save settings