Safety Symbols; General Safety Rules; Work Area Safety; Electrical Safety - RIDGID micro CD-100 Bedienungsanleitung

In this operatorʼs manual and on the product, safety symbols and signal words are used to communicate important safety information. This

Safety Symbols

section is provided to improve understanding of these signal words and symbols.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury.
DANGER
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
CAUTION
NOTICE indicates information that relates to the protection of property.
NOTI E
This symbol means read the operatorʼs manual carefully before using the equipment. The operatorʼs manual contains important
information on the safe and proper operation of the equipment.

General Safety Rules

Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury.
SAVE THESE INSTRUCTIONS!
The CE declaration of conformity (890-011-320) will accompany
this manual as a separate booklet when required.
• Keep your work area clean and well lit. Cluttered or dark areas

Work Area Safety

invite accidents.
WARNING
micro CD-100 Combustible Gas Detector
• Do not operate equipment in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust.
Equipment can create sparks which may ignite the dust or fumes
• Keep children and by-standers away while operating equip-
ment. Distractions can cause you to lose control.
• Avoid body contact with earthed or grounded surfaces such

Electrical Safety

as pipes, radiators, ranges and refrigerators. There is an in-
creased risk of electrical shock if your body is earthed or
grounded.
• Do not expose equipment to rain or wet conditions. Water
entering equipment will increase the risk of electrical shock.
Ridge Tool Company
3