Maintenance - Makita ML702 Handbuch

For ML903 (Fig. 3)
Charge the battery cartridge with the Makita charger before use. To remove the battery cartridge, withdraw it from the
torch/flashlight while pressing the buttons on both sides of the cartridge. After charging, insert the battery cartridge
into the torch/flashlight all the way until it locks in place with a little click.
NOTE:
Battery cartridge 9100, 9102, 9100A and 9102A can be used on ML903 if you install the set plate. Install the set plate
on ML903 with the screw provided as shown in Fig. 4.
The following tables indicate the charging time and operating time on a single charge.
ML702
Voltage
7.2 V
ML901/ML903
Voltage
9.6 V
(Note)
If you use a power checking battery on Model ML901/ML903, the power checking battery will not indicate the remain-
ing battery capacity properly.
ML902
Voltage
9.6 V
Storing battery cartridge
Always charge the Nickel Metal Hydride battery cartridge
before storing it when you do not use it for more than six
months.
Head angle (Fig. 5)
The head angle can be adjusted in four stages. Adjust as
desired.
Replacing bulb (Fig. 6 & 7)
CAUTION:
The bulb is very hot immediately after operation. Wait
until the bulb cools off before attempting to replace it.
10
Battery cartridge
7000
7002
7033
Battery cartridge
9100, 9100A, 9120
9102, 9102A, 9122
9133
9134
9135, 9135A
Battery cartridge
9000
9002
9033
Operating time
Approx. 140 min.
Approx. 210 min.
Approx. 240 min.
Operating time
Approx. 160 min.
Approx. 230 min.
Approx. 260 min.
Approx. 310 min.
Approx. 360 min.
Operating time
Approx. 160 min.
Approx. 230 min.
Approx. 260 min.
First, turn the ring counterclockwise and remove the
reflector. Remove the bulb holder by turning it counter-
clockwise. Then replace the bulb.
Shoulder strap (Fig. 8)
Install the strap on the tool.

MAINTENANCE

To maintain product safety and reliability, repairs, mainte-
nance or adjustment should be carried out by a Makita
Authorized Service Center.
Charger
DC7100, DC9710, DC9711,
DC1201, DC1411, DC1439,
DC1470, DC1422, DC1801
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
DC9711, DC1411, DC1439,
DC1422, DC1801
Charger
DC9710, DC9711, DC1201,
DC1411, DC1439, DC1470,
DC1422, DC1801
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
DC9711, DC1411, DC1439,
DC1422, DC1801
Charger
DC9710, DC9711, DC1201,
DC1411, DC1439, DC1470,
DC1422, DC1801
DC9711, DC1201, DC1411,
DC1439, DC1422, DC1801
DC9711, DC1411, DC1439,
DC1422, DC1801