Troubleshooting - HAISER HSR 120 BT Gebrauchsanweisung

NFC (Near Field Communication) Operation
Pair your NFC-enabled mobile device directly with this unit by just a single tap.
1. Activate NFC on your mobile device.
2. Tap the mobile device on the "
3. Operate your mobile device directly for playback features.
4. To disconnect, tap the mobile device on the "
NFC from your mobile device.
Note: This NFC function only works with mobile devices that support NFC technology.

Troubleshooting

To keep the warranty valid, never try to repair the system yourself. If you encounter problems
when using this unit, check the following points before requesting service.
Problem
No power.
No response from the
unit.
I can't find the device
on my Bluetooth sour-
ce device for pairing.
This is a 15 mins power
off function, one of
the ERPII standard
requirement for saving
power.
30
" icon of the unit.
" icon of the unit to disconnect or disable
Solution
Ensure that the AC cord of the apparatus is properly
•
connected.
Ensure that there is power at the AC outlet.
•
Press /SOURCE button to turn the unit on.
•
Disconnect and reconnect the AC power plug, then turn
•
the unit on again.
Ensure the Bluetooth function is activated on your Bluetoo-
•
th device.
Ensure you have paired the unit with your Bluetooth
•
device.
• When the unit's external input signal level is too low, the unit
will be turned off automatically in 15 minutes. Please increa-
se the volume level of your external device. In the chapter
„Auto Standby Function", you can read how this function can
temporarily be disabled.