Use The Aux Socket; Connect Power; General Operation - HAISER HSR 120 BT Gebrauchsanweisung

Use the AUX Socket

A. Use a RCA to RCA
audio cable (not
included) to connect
the TV's audio output
sockets to the AUX
(R/L) socket on the
unit.
B. Use a RCA to 3.5mm
audio cable (included)
to connect the TV's
headphone socket to
the AUX (R/L) socket on the unit.

Connect Power

• Risk of product damage! Ensure that the
power supply voltage corresponds to the vol-
tage printed on the back or the underside of
the unit.
• Before connecting the AC power cord, ensu-
re you have completed all other connections.
• Connect the mains cable to the AC~ Socket
of the main unit and then into a mains socket.

General Operation

Standby/ON/OFF
When you first connect the main unit to the mains socket, the main unit will be in Standby
mode.
/SOURCE button on the unit to switch the unit ON.
• Press the
• Press and hold the
STANDBY mode. The indicator will light up red.
• Disconnect the mains plug from the mains socket if you want to switch the unit OFF com-
pletely.
• When turning the system on, the system will continue in the mode it was in when it was
turned off last time.
26
AUDIO
A
B
/SOURCE button again on the unit to switch the unit back to