How To Connect The Outputs Of The Controller - Agilent Technologies TV 801 Bedienungshandbuch

17 Technical Information
J1 - In-Out
Figure 16

How to Connect the Outputs of the Controller

The following figure shows a typical logic output connection (relay
coil) but any other device may be connected e.g. a LED, a computer,
etc., and the related simplified circuit of the controller.
The following figure refers to the programmable set point signal on
pins 11 and 9.
226/248
Case 2 with transistor utilization
TV 801 Navigator Bolted Flange User Manual / 87-900-980-01 (D)