Installation - Agilent Technologies TV 801 Bedienungshandbuch

16 Instructions for Use

Installation

Figure 1

Installation

Do not remove the adhesive and protective cap before connecting the
CAUTION!
turbopump to the system.
Install this device only in indoor ambient and in any case don't use in
an environment exposed to atmospheric agents (rain, snow, ice),
dust, aggressive gases, or in explosive environments or those with a
high fire risk. During operation, the following environmental
conditions must be respected:
In the presence of magnetic fields the pump must be protected using
a ferromagnetic shield. See the appendix "Technical Information" for
detailed information.
The TV 801 Navigator Bolted Flange must be connected to a primary
pump (see "Technical Information").
200/248
maximum pressure: 2 bar above atmospheric pressure
temperature: from +10 °C to +45 °C
relative humidity: 0 – 90 % (non-condensing)
TV 801 Navigator Bolted Flange User Manual / 87-900-980-01 (D)