Inhaltsverzeichnis
Werbung
Do not overtighten the valve as this may damage the thread on the pump.
CAUTION!
Then connect the cable from the valve to the suitable connector on
the controller (see the preceding paragraph "INTERCONNECTIONS").
TV-301 AG Rack Controller Compatible
Vent Valve mod. 969-9844
For further details refers to the Rack Controller manual.
To install the vent valve unscrew and remove the threaded plug (see
figure below).
Figure 38
Screw the flange mod. 969-9108 on the pump, taking care of the o-
ring right position.
Assemble the seal ring and lock the vent device in position using the
KF klamp.
TV 301SF Navigator User Manual /
87-900-957-01 (H)
Technical Information
Vent Accessories
281/300
17
Werbung
Kapitel
Inhaltsverzeichnis
