Agilent Technologies TV 301SF Bedienungshandbuch Seite 242

17 Technical Information
Description of the TV 301SF Navigator
A thermistor sensor is mounted near the upper bearing to prevent
the pump from overheating.
The pump is balanced after assembly with a residual vibration
amplitude less than 0.01 µm.
The pump can operate in any position and can be supported on the
high vacuum flange. The connection of the forevacuum on the side of
the pump is a KF 16 NW flange.
The pump is balanced after assembly with a residual vibration
amplitude less than 0.01 µm.
The pump can operate in any position and can be supported on the
high vacuum flange. The connection of the forevacuum on the side of
the pump is a KF 40 NW flange.
Figure 4
242/300 TV 301SF Navigator User Manual / 87-900-957-01 (H)