Hebo Hebocall Gebrauchsanleitung Seite 38

English / 38
CONFIGURING HEBOCALL
1. Activate the mobile phone's Bluetooth
supplied with your telephone to find out how to do this.
2. With the HEBOCALL
for 10 seconds. The indicator LED will flash red and green alternately.
The kit is then ready to be linked. Ensure that your mobile phone and
the HEBOCALL
3. Set up linking between the HEBOCALL
following the telephone manufacturers' instructions in the user's
manual.
4. When the telephone has recognised the HEBOCALL
device it will tell you so on its screen. Press OK and your telephone
will then ask you to enter the password for the device found. Key in
3579, which is the password to access your HEBOCALL
press OK or the equivalent and the mobile phone will show that the
device is linked up.
5. Once linking is complete, the indicator LED will start to flash green.
. Remember to switch off your HEBOCALL
helmet off.
. When you unplug the speaker/throat microphone connectors or the
®
Bluetooth kit earphone, it will switch off automatically to save power.
. When you switch off the HEBOCALL
that the hands free kit has been automatically disconnected.
. The next time you connect the HEBOCALL
automatically make the link. Make sure your telephone has the Bluetooth
function activated at all times and that its screen shows the hands free
linked symbol. In some models of telephone you have to press any key
after connecting the HEBOCALL
Refer to the manual for your telephone for further information.
®
®
kit switched off, hold the on/off button down
®
free hands kit are not too far apart (max. 10m).
®
FOR THE FIRST TIME
®
function. Refer to the manual
®
kit and the telephone by
®
kit when you take your
®
kit your telephone will tell you
®
kit your telephone will
kit to link up the devices.
® ®
Bluetooth
®
device, then
®