Hebo Hebocall Gebrauchsanleitung Seite 36

English / 36
FITTING YOUR HEBOCALL
HELMET
INSTALLING THE SPEAKERS IN THE HELMET.
. Before installing the speakers, for more
comfortable use of your HEBOCALL
free kit check that your helmet has a cavity for
the earphone units and the lining of the helmet
is removable, so that you can use it in full
comfort. If your helmet does not have these
features, we recommend that you use a HEBO
helmet.
(0.1) Remove the lining following the helmet
manufacturer's instructions.
(0.2) Install the speaker with its Velcro fitting in
the cavity for this purpose inside your helmet.
If the helmet does not have felt for fixing the
speaker, use the felt and adhesive supplied with
your HEBOCALL
(0.3) After fitting the speaker, replace the helmet
lining according to the manufacturer's
instructions.
(0.4) The connector must be fitted outside the
helmet for connection to the hands free kit.
(0.5) After replacing the lining all that remains is
to connect the throat microphone to the helmet
strap.
. IMPORTANT!!!
ensure that the throat microphone is properly
connected (making contact) to your neck when
the helmet strap is fastened. To do this, adjust
®
®
kit.
For correct operation please
KIT IN YOUR
®
hands
0.1 Removing the lining
0.2 Installing the earphones
0.3 Fitting the cable
0.4 Connector
0.5 Installing the throat
microphone