Specification; Ce Declaration Of Conformity - GMC GHT26 Originalbetriebsanleitung

Volts
V
Alternating current
~
Ampere
A
No load speed
n
0
Hertz
Hz
Watt, kilowatt
W, kW
(revolutions or reciprocation) per minute
/min or min
-1

CE Declaration of Conformity

The undersigned: Mr Darrell Morris
as authorised by: GMC
Declares that
Identification code: 829828
Description: Petrol Hedge Trimmer
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• EMC Directive 2004/108/EC
• Outdoor Noise Directive 2000/14/EC
• EN ISO 10517:2009
• EN ISO 14982:2009
• EN ISO 3744:1995
• EN ISO 11094:1991
Applied Conformity Evaluation Method
2000/14/EC: Annex III
Sound Power Level dB (A)
Measured: 95
Guaranteed: 109
Notified body: TÜV SÜD Product Service
The technical documentation is kept by: GMC
Date: 27/10/14
Signed:
Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, Company No. 06897059. Registered address:
Powerbox, Boundary Way, Lufton Trading Estate, Yeovil, Somerset BA22 8HZ,
United Kingdom.

Specification

Engine type:
Engine capacity:
Power:
Cuts per minute:
Engine speed:
Fuel mixture:
Fuel capacity:
Spark plug:
Spark plug gap:
Blade length:
Max. cutting dia:
Weight:
Sound and vibration information:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
Weighted vibration a (main handle):
h
Weighted vibration a (auxiliary handle):
h
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound
protection measures are necessary.
As part of our ongoing product development, specifications of GMC products
may alter without notice.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and use
anti-vibration gloves. Do not operate the tool with hands below a normal comfortable
temperature, as vibration will have a greater effect. Use the figures provided in the
specification relating to vibration to calculate the duration and frequency of operating
the tool.
Sound and vibration levels in the specification are determined according to EN60745
or similar international standards. The figures represent normal use for the tool in
normal working conditions. A poorly maintained, incorrectly assembled, or misused
tool, may produce increased levels of noise and vibration. www.osha.europa.eu
provides information on sound and vibration levels in the workplace that may be
useful to domestic users who use tools for long periods of time.
5
2 Stroke
26cc
1hp
530 cuts/min
10000rpm
Unleaded petrol / 2 stroke oil
mix (25:1)
600ml
L9T
0.5 - 0.7mm
560mm
28mm
6.5kg
86.5dB(A)
109dB(A) )
3dB
4.764mm/s
2
4.956m/s
2
1.5m/s²
GB