Shortcut To Timer; Switch Of The Relays (Manually) - TechGrow Ballast Basic Micro Anleitung

Select "Set clock" and press the PTK.
Date 01-01-20000
Time 00:00:00
Set date and time. "ok" is displayed in the screen..
Date 01-01-2019
Time 15:24:00 ok
Turn the PTK to cancel and adjust or press the PTK to
confirm. You return to the quick menu.

6.2 Shortcut to timer

Select "Set timer" and press the PTK.
Set clock
=> Set timer
24-hour mode:
On at 00:00
Off at 00:00
Asynchronous mode:
On for 00:00
Off for 00:00
Depending on the selected time clock the on/off times
are displayed with On at/Off (24-hour timer) or On
for/Off for (asynchronous timer).
Set the desired switching times. Press the PTK to return
to the main screen.

6.3 Switch of the relays (MANUALLY)

If you want to switch off all relays, because you want to
change plugs, go through the following steps:
____________________________________________________________________________________________________________________________
TechGrow | InnovativeGrowingSolutions
Set timer
=> Relays off
Select "Relays off". Press the PTK.
The next screen is displayed:
Maintenance mode
Push 3x to exit
The relays will be switched off and the LEDs go off.
When both relays are off, it is safe to change the plugs.
After changing the plugs, press the PTK three times to
switch on the relays. You automatically return to the
main screen.
14