Set Startup Delay; Hardware Test; Reset To Factory Defaults; Quick Menu - TechGrow Ballast Basic Micro Anleitung

Depending on the selected time clock the on/off times
are displayed with On at/Off (24-hour timer) or On
for/Off for (asynchronous timer). Set the desired
switching times.

5.4 Set startup delay

You are in the main menu. (If necessary, reboot the
Ballast Basic Micro to get here.)
Select "Startup delay".
Set timer
=> Startup delay
Startup delay:
.. minutes
Set the amount of minutes (up to 300 minutes) or select
"Off". Press the PTK to confirm.
You return to the main screen.
Only if you set a startup delay (in this example 5
minutes), you will see the following screen when
rebooting the Ballast Basic Micro:
Startup delay
00:04:59
Push 5x to skip
00:04:59
The Ballast Basic Micro counts down to zero. If you want
to skip this 5-minute delay, press the PTK 5 times.

5.5 Hardware test

You are in the main menu. (If necessary, reboot the
Ballast Basic Micro to get here.)
Startup delay
=> Hardware test
____________________________________________________________________________________________________________________________
TechGrow | InnovativeGrowingSolutions
Select "Hardware test" to test the hardware of the Ballast
Basic Micro.
00:00:01 # 0
When the test is completed, you automatically return to
the main screen.

5.6 Reset to factory defaults

You are in the main menu. (If necessary, reboot the
Ballast Basic Micro to get here.)
Hardware test
=> Reset2factory
Select "Reset2factory" and press the PTK to reset all
settings to factory defaults.
Resetting ...
You automatically return to the main screen.

6. Quick menu

24-03 19:56:33
- 05:00 + 18:30
When in the main screen, press the PTK for 5 seconds to
enter the Quick Menu.
The quick menu consists of the following items:
Set clock
•
Set timer
•
Relays off
•
<< BACK << (back to the main screen)
•

6.1 Shortcut to date and time

=> Set clock
Set timer
13