Herunterladen Diese Seite drucken

Gingko CLICK CLOCK Bedienungsanleitung Seite 4

For the collections of brick,slab & wall
Vorschau ausblenden Andere Handbücher für CLICK CLOCK:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
1. Press the
button to access the alarm setting menu and the display
screen will show
2. To set your alarm time, press and hold down the
will change to 8:00. Then press SET button and the alarm hour section will be flashing.
3. Press or button to select your required alarm HOUR, then press
the alarm MINUTE display number will be flashing
4. Press or button to select your required alarm MINUTE, then press
and the display screen will show 5:AL (Monday-Friday Alarm) or 7:AL (Monday to
Sunday Alarm). Press + or - to change between 5:AL or 7:AL and press set to confirm
and exit the alarm setting mode.
5. To turn off the alarm, press and hold down the
go back to
1. The clock comes with a snooze function. The snooze time is 5 minutes each time and
it can be snoozed 5 times.
2. The snooze function will be turned on automatically when the clock is powered by
adapter or batteries
3. When the alarm is on, pressing any button will stop the alarm and it will go off again
in 5 minutes.
4. Pressing any button twice when the alarm is on can turn off the snooze function.
1. This product is made from wood. Please keep in a dry place and if needed clean with
a soft dampened cloth
2. Please only use the adapter supplied with the clock to power this product; If any
other adapter with the wrong rated output is used on this clock, it may damage this
clock and this will not be covered by the manufacturer warranty.
3. Place this item in a safe place and keep away from high heat or wet areas. Heavy
knocks or falls may seriously damage this product.
4. When the display number/numbers start flashing, it means the battery is low, not a
fault. You will need to recharge it as soon as possible to solve this issue.
5. If the veneer is slightly peeling off on the corner, it's safe to user some small amount
of glue to fix it.
which means the alarm is currently off.
to turn it back on, press and hold down this button again.
button and the display screen
button and the display will
to confirm and
to confirm

Werbung

loading