Binary Inputs; Function Outputs And Alarms - Emerson CSI 6500 Machinery Health Bedienungsanleitung

Product Information / Produktinformation A6620
Analog I/O Card

1.6.3 Binary inputs

For limit blocking, limit increase and latch resets.
Binary input 1
Binary input 2
Binary input 3
Binary input 4
Same GND for all inputs
Active
Inactive
Signal level

1.6.4 Function outputs and alarms

Limit settings
During configuration freely selectable depending on the relevant function.
Limit value 1
Limit value 2
Limit value 3
Limit value 4
Limit value 5
Limit value 6
Limit value 7
Limit value 8
voltage supply
GND for all outputs
Setting condition
Adjustment range
Maximum values for alarm outputs
Hysteresis
IN BIN1+: d14
IN BIN2+: b14
IN BIN3+: z14
IN BIN4+: d16
IN BIN GND: b16
input HIGH
input LOW or open
LOW: 0 ... +3 V, HIGH +13 ... +48 V
OUT1+: b28
OUT2+: z28
OUT3+: d30
OUT4+: b30
OUT5+: z30
OUT6+: d32
OUT7+: b32
OUT8+: z32
d24 and z24 (redundant)
b24
function and switching characteristic defined during
configuration
0 ... 100 % of the configured measuring range
C−E off: max. voltage U
C−E conducting: max. current I
freely selectable
Page 14
= 48 V
CE
= 200 mA
CE