Velleman NVR1 Schnelleinstieg Seite 9

CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
3. To assign a channel to a remote IP camera, click URI to enter the address of the camera and its port
number.
4. Click SETUP to enter the access information of the camera.
USER NAME
PASSWORD
CACHE TIME (MSEC)
MODEL
GET TYPE
PROFILE
TYPE
IMAGE SIZE
QUALITY
I.P.S.
AUDIO
5. Enter the user name (USER NAME) and password (PASSWORD) to access the IP camera.
6. Click GET TYPE to detect the camera and make sure the access information is correct.
7. Select the image size (IMAGE SIZE), image quality (QUALITY), and images per second (I.P.S.).
Note: The available options depend on the camera you want to connect.
8. Click GET TYPE to detect the camera and make sure the access information is correct.
9. Optional: for a camera with audio recording, set AUDIO to ON or OFF.
10. Configuration of Camera on LAN Port
Note: This configuration method is for ETS cameras (CAMIP11, CAMIP12).
Automatic Configuration
The NVR will automatically configure the IP address of an ETS camera connected by LAN if:
• The default IP configuration method of the camera is DHCP.
• The camera is powered on before the NVR is powered on.
If not, you can configure the IP address of your camera manually as described further below.
Manual Configuration
If the NVR doesn't configure the IP address of your camera automatically as described above, the default IP
configuration method of your IP camera may not be set to DHCP. To solve this, reconfigure the camera's IP
address to 10.1.1.xx (xx ranges from 11 ~ 253), in the same network segment as the NVR.
1. In the quick operation panel [18], click
connection status and MAC address.
V. 01 – 23/03/2012
NVR1
ADVANCED CONFIG
CHANNEL
CH1 ip_office.ddns.eagleeyes.tw
CH2 10.1.1.14
CH3 10.1.1.30
CH4 10.1.1.12
CH5 10.1.1.16
CH6 10.1.1.13
CONFIG-CH1
. You'll see the list of every connected IP camera with its
9
URI PORT
00080
00088
00088
00088
00088
00088
admin
**********
AVTECH
IP CAMERA
PROFILE-3
H264
720 X 480
30
ON
EXIT
CONFIG
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
©Velleman nv