Velleman NVR1 Schnelleinstieg Seite 6

timer recording on
overwrite on
sequence mode on
PTZ mode on
CPU load
network status
(WAN) internet connected
(WAN) local connection
(LAN) auto mode – Mbit/s
(LAN) DHCP / static IP mode
16 available hard disk capacity
17 channel status
auto search on
live audio on
audio playback on
original size
recording
alarm event
live information
18 quick operation
Click to show the power-off panel to stop or reboot the system.
Click to show the channel switch panel and select the channel you want.
Switch to the channel you want first, then click
red frame on the bottom left of the screen to move to the area where you want to zoom in.
Click to enter PTZ mode and show the PTZ camera control panel.
Click to open the IP search window and check the connection status of each channel.
19 main menu
QUICK START
SYSTEM
EVENT
INFORMATION
ADVANCED CONFIG
SCHEDULE SETTING
20 playback panel
fast forward
fast rewind
V. 01 – 23/03/2012
NVR1
Click to set the status display, image settings, and date & time.
Click to set the system configuration.
Click to enter the event search menu.
Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK,
DISPLAY, RECORD and NOTIFY.
Click to set the recording timer.
Click to fast forward at 4 to 32 times normal speed.
Click to fast rewind at 4 to 32 times normal speed.
6
timer recording off
overwrite off
sequence mode off
PTZ mode off
(WAN) internet disconnected
(LAN) auto mode – Gbit/s
(LAN) camera disconnected
auto search off
audio off
audio playback off
fit to screen
human detection event
motion event
playback information
to enter zoom mode. Click and drag the
©Velleman nv