ION Air Pro 2 Schnellstartanleitung Seite 11

3. Press the Wi-Fi power button on the Wi-Fi PODZ to turn
LED lights up to indicate the Wi-Fi is warming up. It will take around 15-20 seconds for the Wi-Fi
to warm up and become connectable. The LED will flash when the Wi-Fi function is active or
connected.
4. Press the Wi-Fi power button to turn off the Wi-Fi anytime.
Note:
Wi-Fi will drain your camera battery more rapidly when activated. Turn the Wi-Fi off if you are
not using it to change settings or upload content.
8.3.2 Connecting the Camera to Your Computer
1. Turn on your camera and Wi-Fi PODZ.
2. Go to the network settings of your PC and choose Wi-Fi settings. Search the network, find and
click "WIFIPODZ".
3. Enter password "123456789" and to connect to your camera.
4. Open your Internet browser and input "192.168.1.2". You will then be able to view the files stored
in your camera.
8.3.3 Connecting the Camera to Your Smart Device (Browser)
1. Turn on your camera and Wi-Fi PODZ.
2. Go to the network setting of your mobile device and choose Wi-Fi settings. Search the network,
find and click "WIFIPODZ".
3. Enter password "123456789" to connect to your camera.
4. Open your Internet browser and input "192.168.1.2" or "wifi.podz". You can now view the photos
and videos stored in your camera.
8.3.4 Connecting the Camera to Your Smart Device (App)
1. Search iontheaction app in your devices app store.
2. Download and install the app to your smart device.
3. Turn on your Wi-Fi PODZ.
4. Go to the network settings of your device and choose Wi-Fi settings. Search the network, find
and click "WIFIPODZ".
5. Enter password "123456789" to connect to your camera.
6. Open your app.
7. Please refer to the app page for detailed operating instructions.
9. Sealing Your Camera to prevent water damage
The Waterproof Housing (standard PODZ on iON Air Pro 2 camera and Wi-Fi PODZ in Air Pro 2 Wi-Fi)
allows you to operate the camera up to 10 meters or 30 feet under water. You must seal the camera
on your Wi-Fi. The blue
EN-10