ASROCK 775i915P-SATA2 Bedienungsanleitung Seite 19

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Header
(9-pin USB67)
(see p.2 No. 22)
USB 2.0 Header
(9-pin USB45)
(see p.2 No. 24)
Infrared Module Header
(5-pin IR1)
(see p.2 No. 26)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.2 No. 37)
Front Panel Audio Header
(9-pin AUDIO1)
(see p.2 No. 30)
ASRock 775i915P-SATA2 Motherboard
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
connect to the
power cable to the power
power supply
connector of the power supply.
ASRock 8CH I/O accommo-
dates 4 default USB 2.0 ports. If
those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
ASRock 8CH I/O accommo-
dates 4 default USB 2.0 ports. If
those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
These connectors allow you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
CD1
tuner card, or MPEG card.
This is an interface for front
panel audio cable that allows
convenient connection and
control of audio devices.
1 9 1 9 1 9
1 9 1 9