Technical Specifications - AVM FRITZ!DECT 100 Bedienungsanleitung

Help in Case of Errors
No connection with the base station
The "DECT" LED fl ashes briefl y at regular
intervals. FRITZ!DECT Repeater 100 does
not have a wireless connection to the
base station.
1. Insert the repeater in an outlet near
your base station.
2. When the LED "DECT" lights up, the
fi rst outlet is located outside the range
of the base station, or the wireless
connection is faulty. For more informa-
tion, see also page 9.
If "DECT" continues fl ashing,
FRITZ!DECT Repeater 100 is not regis-
tered with the base station. Register
the repeater again.
FRITZ!DECT Repeater 100 cannot
be registered with any FRITZ!Box
confi gured as a DECT repeater.
Deregistration
If you would like to register FRITZ!DECT
Repeater 100 with another base station,
deregister it from the current base
station fi rst:
1. Hold the "DECT" button down for at
least 6 seconds.
2. FRITZ!DECT Repeater 100 deregisters
from the base station.
After a brief delay the "DECT" begins
fl ashing. Now you can register the repeat-
er with another base station.
Removing FRITZ!DECT Repeater
100 from the power outlet does
not de-register it from the base
station.
12
Disposal
In accordance with the Waste of Electrical
and Electronic Equipment Directive,
FRITZ!DECT Repeater 100 may not be
disposed with household waste. Please
bring the device to your local collection
points for disposal after use.
Technical Specifi cations
 DECT wireless standard
 Range: up to 40 m indoors and up to
300 m outdoors
 Maximum power consumption:
ca. 1.5 W
 Power consumption on standby:
ca. 0.9 W
 230 V, 50 Hz A/C
(Type E CEE 7/5 or Type F CEE 7/4)
 Dimensions (without plug):
93 mm x 59 mm x 41 mm
 Weight: approx. 135 g
 Socket: for connected devices up to
2300 W / 10 A
 Ambient conditions
- operating temperature: 0 °C to 40 °C
- relative humidity:
10% to 90%, no condensation
13