Combustion Head Adjustment; Electrodes - Diffuser Adjustment - Lamborghini Caloreclima PG 65 Installations- Und Wartungsanleitung

COMBUSTION HEAD ADJUSTMENT

1) Loosen knobs A.
2) Manipulating the knobs modifies the position
of the draught tube in relation to the
combustion head. Set the knobs to 1, 2 and
3. These settings correspond, respectively, to
minimum, medium and maximum burner
delivery.
3) After adjusting, screw down the knobs.

ELECTRODES - DIFFUSER ADJUSTMENT

There are 2 ignition electraodes. To adjust these, observe the illustration above and follow the instructions.
NOTE: The ignition electrodes must not touch the diffuser or the draught tube for any reason. Otherwise,
they would not work properly and burner operation would be affected.
NOTE: To prevent damaging the combustion head adjustment parts, after removing the
diffuser we advise using a spanner/fox wedge for fitting and removing the nozzle.
17