Epson DM-M820 Bedienungsanleitung Seite 13

2. Connect the connector of the DM-M820 to the IM-800. See
illustrations A, B and C. If you connect the DM-M820 to a PC,
connect it properly, referring to the PC manuals.
Note:
Cable A is for models with an MSR and a touch panel.
Cable B is for models without an MSR and without a touch panel.
Cable C is for models with a touch panel and without an MSR.
Connector name
DC plug
Display connector
Serial port connector*
PS/2 connector for PC
PS/2 connector for
keyboard
*Applies only to models with a touch panel
3. Attach the AC cable of the IM-800 (or PC); then attach the rear
cover.
Installing the Touch Panel Driver for the IM-800 or PC
For models with a touch panel
If you use a touch panel, install the touch panel driver from the
Touch Panel driver CD-ROM for the DM-M820.
Install the touch panel driver after installing the operating system
on the IM-800 (or PC).
The touch panel driver may differ depending on the operating
system installed. Use the suitable driver for the operating system.
Install File
Be sure to calibrate the touch panel when the DM-M820 is first used
and if misalignment occurs between the touch point and the mouse
cursor.
Cable Used for
Cable Connecting to the DC output of the IM-800
A/B/C (DC 12 V) or AC Adapter OI-MR01
Cable Connecting to the Display port of the IM-800
A/B/C or PC
Cable IM-800:Connecting to the COM1 or COM 2
A/C port of the IM-800 for the touch panel
PC: Connecting to the Serial Port for the
touch panel.
Cable A Connecting to the keyboard port of the
IM-800 for the MSR** Don't connect to the
mouse port.
Cable A Connecting an external keyboard**
Windows setup.exe
MS-DOS install.exe
**Applies only to models with an MSR
DM-M820 User's Manual 7
English