Troubleshooting - Kuppersberg TG 699 Handbuch

ENGLISH

9. TROUBLESHOOTING

Faults may be solved easily sometimes. Before calling the technical service, read
the following chart.
FAULT
Electrical parts do not work
Gas does not appear
Lighter does not work
Flame does not spread
equally
Flame dies down at first
ignition
Gas smell
POSSIBLE REASON
Fuse may have been blown
Valve may be off.
Gas in tube may ran out.
Burner parts may be wet.
Burner cover may not be
fitted correctly.
Ignition plug may be stained.
Burner parts may be wet.
Burner cover may not be
fitted correctly.
Burner lines may be blocked.
The button may not be
pushed correctly.
Burner lines may be blocked.
There may be a gas leak in
the gas tube connector.
TECHNICAL PASSPORT
SOLUTION
Check the fuse box in home.
Turn on the valves.
Change the gas tube.
Dry the burner parts.
Fit the burner cover correctly.
Clean the ignition plug.
Dry the burner parts.
Fit the burner cover correctly.
Clean the burner lines.
Hold down the button for
a few seconds after flames
appear.
Check the gas tube
connector.
Gas hob
45