Floor Attachment Zubeset-B Pit Ladder - W&W 78300 Montageanleitung

5.2 Floor attachment ZUBESET-B pit ladder

5.2.1 See the diagram for the necessary distance between the drill holes.
Diagram (Ladder is leaned against the sill)
pit depth
100cm
120cm
140cm
160cm
180cm
200cm
220cm
240cm
260cm
280cm
If there are no other equal possibilities of holding on to, the ladder must jut
out at least 1m beyond the exit, according to §22 pt 2 of AAA ladders and
treads.
5.2.2 Mounting in case of telescopic sliding doors, closing to one side and revolving
doors
Fix the floor attachment as near as possible to the closing side of the door. The distance
has to be max. 30cm.
5.2.3 Mounting in case of centrally closing sliding doors
Fix the floor attachment so that the ladder stands in the middle of the door.
5.2.4 Mark the two drilling holes on the bottom.
5.2.5 Drill the holes with a 14" drill.
5.2.6 For hydraulic lifts seal the dowels with the provided
sealing compound.
5.2.7 Screw the floor attachment to the bottom.
Distance between drill holes and
edge
46cm
53cm
60cm
68cm
77cm
82cm
89cm
97cm
104cm
111cm
© W W 08/2016 Version 7
&
ID32907
12