Safety Information; Safety Precautions - Swisson XRC-200 Bedienungsanleitung

Safety Information

Consider the following notes absolutely when you set up, connect and use the XRC-200.
This product is not for household use. Read this manual before operating the device, follow the safety precautions
and observe all warnings in this manual.
Use this device only in accordance with local laws and regulations.

Safety precautions:

Disconnect the device from AC power before removing any cover or part, including fuse and when not in
•
use.
Ensure that the device is electrically connected to ground (earth).
•
Use only a source of AC power that complies with local building and electrical codes and has both overload
•
and ground-fault (earth fault) protection.
Connect the device to AC power using the supplied power cable.
•
Before using the device, check that the power distribution equipment and cables are in perfect condition
•
and rated for the current required of all connected devices.
Isolate the device from power immediately if the power cable or power plug is damaged in any way,
•
defective or wet, or if they show signs of overheating.
Do not expose the device to rain or moisture.
•
Do not operate the device if any cover or component is missing damaged or deformed.
•
Refer any service operation not described is this manual to Swisson.
•
Provide unrestricted airflow around the device.
•
Do not operate the device if the ambient temperature exceeds 55 C (131 F).
•
Do not modify the device in any way not described in this manual or install other than genuine Swisson
•
parts.
Do not attempt to bypass any fuse. Replace any defective fuse with one of the specified type and rating
•
only.
3 English